It is very necessary to inspect organic fertilizer processing equipment after the operation is completed, which helps to ensure the normal operation of the equipment, extend the service life of the equipment, and improve production efficiency and safety. The following are the main contents of the post-operation inspection of organic fertilizer processing equipment:
1. Cleaning
Remove winding materials: Check and remove the winding materials and hardened attachments on the compost turning shaft of the compost turning machine to ensure that the compost turning shaft is clean and unobstructed.
Clean the crawler: For crawler compost turning machines, special attention should be paid to the cleaning of the crawler to prevent material residue from affecting the walking performance.

2. Mechanical parts inspection
Check the tool and bolt: Check whether the compost turning knife is defective and whether the fastening bolts are loose, and ensure that the tool is intact and tightened in place.
Check the latch and cotter pin: Check whether the latch and cotter pin of each part are defective to prevent safety hazards caused by missing.
Check the transmission belt: Check whether the transmission belt is normal and appropriate in tightness, whether there is severe wear and breakage, and ensure the stable operation of the transmission system.
Check tire pressure: For organic fertilizer processing equipment equipped with tires, check whether the tire pressure is normal to prevent safety hazards caused by insufficient or excessive pressure.
3. Oil and electrical inspection
Check the oil tank and water tank: Check the oil tank and water tank to ensure that there is enough oil and water to avoid damage to the equipment due to insufficient oil or water.
Check electrical facilities and lines: Check whether the electrical facilities and lines of the organic fertilizer processing equipment are unobstructed and the insulation is good to prevent equipment damage or safety accidents caused by electrical failures.